爱普生1390吸废墨 - 经验交流

AiPuSheng 1390 suction waste ink is a small capacity suction ink supply system in Epson’s 1390 printer series, which is used to drain the waste ink from the printer head during cleaning and to store the waste ink generated by the printer.
爱普生1390吸废墨是爱普生1390系列打印机中容量较小的吸废油用系统，用于在清洗时将墨水排出打印头，并存储打印机产生的废墨。
AiPuSheng 1390 suction waste ink has the advantages of simple and convenient installation, light weight and low cost. It is suitable for Epson 1390 printers equipped with a small capacity ink supply system. Due to the small capacity of the waste ink tank, it needs to be cleaned or replaced frequently.
爱普生1390吸废墨具有安装简洁，重量轻，成本低的优点。适用于配备容量较小的墨水用系统的爱普生1390打印机。由于废墨箱容量较?。孕枰Ｇ逑椿蚋?。
The maintenance and replacement methods of AiPuSheng 1390 suction waste ink tank are relatively easy. Generally, it is first necessary to turn off the printer power supply and power switch, then open the upper cover of the printer, and take out the waste ink tank. The suction mouth of the waste ink tank will be connected to the waste ink pipe. After the connection is completed, the suction of the waste ink tank can be adjusted according to the needs of the printer.
爱普生1390吸废墨箱的维护和更换方法比较简单，通常先要关闭打印机电源及电源开关，然后打开打印机上盖，将废墨箱取出，将废墨箱的吸嘴连接到废墨管，完成连接后，根据打印机的需要调节废墨箱的吸力。
【爱普生1390吸废墨】In addition, it should be noted that the suction force should be appropriate, not too strong and not too weak, and the waste ink should be cleaned up in time to ensure that the waste ink does not overflow.
此外，应注意吸力应该适中，不宜太大也不要太小，应及时清理废墨，确保废墨不会溢出。