爱普生1390清零英文

EPSON 1390 RESET TO FACTORY DEFAULTS
Written instructions to reset Epson 1390 printer to factory defaults.
1) Power on the Epson 1390 printer and wait for it to finish its initialization.
2) Once the printer is ready for use, press and hold the “Load/Eject” and “Cancel” buttons simultaneously for 5 seconds.
3) After 5 seconds have elapsed, release the “Load/Eject” and “Cancel” buttons.
4) After releasing the buttons, press the “Load/Eject” button again and hold it for 5 seconds.
5) After 5 seconds, release the “Load/Eject” button.
6) The Epson 1390will now begin to reset itself to factory default settings.
7) After the reset is complete, the printer will return to its Ready mode.
8) To complete the reset process, unplug the printer, wait 10 seconds, and then plug it back in.
At this point, the Epson 1390 printer should be reset to its factory default settings. If you are still encountering issues, consult the manufacturer’s manual for further assistance.
【爱普生1390清零英文】It is also important to note that resetting the printer to factory defaults will remove all current settings, data, and documents stored in the printer’s memory. To avoid losing this data, please make sure all documents are backed up prior to starting the reset process.