爱普生330清零还不行

Epson 330 Printer Reset
Step 1: Power off your Epson 330 printer and disconnect the printer power cord from the wall outlet.
Step 2: Hold down both the “Power” and “Cancel” buttons simultaneously and then plug the power cord back into the wall outlet.
Step 3: Release the power and cancel buttons. The Epson 330 Printer will start a “internal self test”.
【爱普生330清零还不行】Step 4: Wait until the “internal self test” has completed. You can tell when the internal self test is done when the “Ready” light on the printer turns on.
Step 5: Press and hold the “Paper-Feed” button for three seconds. The “Paper-Feed” button is the one with the picture of a paper being fed into the printer.
Step 6: Press the “Test” button to confirm the printer reset.
Step 7: Release the “Paper-Feed” button and the printer reset is complete.
Congratulations! You have successfully reset your Epson 330 printer. resetting your printer should resolve any issues you may have been having with your printer. If not, then you may need to consult the troubleshooting guide that comes with the printer.
If the reset procedure did not solve any problems, you may need to contact Epson technical support for help. They can provide you with more detailed instructions for troubleshooting and resolving specific problems with your printer.
We hope this guide has been useful in helping you to reset your Epson 330 printer.