What
If your Canon printer says that the waste ink absorber is full, then you need to perform a cleaning procedure to reset the printer. Here are the steps:
1. Turn off the printer and unplug the power cord from the outlet.
2. Press and hold the “Stop/Reset” button on the printer.
3. Plug the power cord into the outlet and turn on the printer.
4. Release the “Stop/Reset” button when the printer starts.
【佳能打印机废墨满了清洗】5. Select the “Waste ink absorber cleaning” option from the menu.
6. Follow the instructions on the printer’s LCD display to complete the cleaning procedure.
7. Turn off the printer and unplug the power cord.
8. Leave the printer off for at least 10 minutes.
9. Plug the power cord into the outlet and turn on the printer.
10. Check that the waste ink absorber is now empty.
If the waste ink absorber is still full after the cleaning procedure, then you may need to contact a Canon service center for assistance.

• 佳能g1x
• 惠普6930p,惠普打印机怎么连接家里wifi
• 佳能mf4410
• 佳能6，佳能6D相机
• fx9，佳能FX9和HP 12A的区别和对比
• 佳能a710,佳能A710is老是显示没电
• 无法连接到打印机0x0000011b 无法连接mongodb
• epson打印机驱动下载,惠普打印机怎样安装驱动程序
• 激光打印机维修,惠普154激光打印机维修
• 汉印打印机驱动