佳能e478废墨清零 - 经验交流

Canon E478 Waste Ink Reset
Canon E478 waste ink reset procedure is necessary for users to prepare the machine for a regular or basic maintenance. The procedure is quite simple, but should be done with care and only when your printer is not in use. This reset procedure should help you to save money on cartridges and reduce the amount of ink waste.
1. Turn off the printer and disconnect the power cord.
2. Wait for a few minutes, and then turn the printer back on.
3. Open the cover and locate the waste ink pads. These are located on the right side of the printer, near the cartridge slots.
4. Unscrew the screws that secure the waste ink pads and pull out the pads. Be careful not to damage the pads.
5. Using a manual paper clip, press the reset button inside the waste ink pads. This will reset the ink levels in the Canon E478 printer.
6. Put the waste ink pads back in their place, and secure them with screws.
7. Close the printer cover and turn it back on.
【佳能e478废墨清零】8. Once the printer is ready, press the “Ink” button on the control panel. This will show the current ink levels.
9. Click “OK” to reset the ink levels to the appropriate value.
10. Print a test page to ensure that ink levels are reset properly.
Your Canon E478 waste ink reset procedure is now complete. Make sure to routinely check and reset the ink levels to further reduce ink waste and prolong the life of your printer.